With the development of technology, it is now possible to deal with the above problems by using polymer composite materials, which use the more experienced technology system of Youmei Ka Wah. The material has good adhesion and compressive strength, which can avoid the wear of the unpacking field correction coater. Together, because of its metal shortage concession, it can absorb the shock oscillation of the device well and avoid secondary wear.

Common faults and treatment methods of coating machine:

In the process of running the coater, there are often wear problems in the transmission parts, such as the wear of the dryer shaft head of the coater and the wear of the bearing chamber of the paper roll. Traditional correction methods include surfacing, thermal spraying, brush plating, etc., but there are certain harms: surfacing will make the surface of the parts reach a high temperature, forming deformation or cracks, and will lead to shaft cracking when severe; The plating coating can not be too thick, and the pollution is severe, and the use is also constrained.

Coater concrete foundation damage Coater coater is affected by corrosion, aging, device vibration and other factors, and will also cause damage to the concrete base and other parts, resulting in the loosening of the bolts of the fastening device, which seriously affects the production. The traditional concrete pouring method is handled, which will greatly extend the correction time, and it is difficult for enterprises to bear. Polymer composite material is also a good deal of this problem, the material itself has an impact resistance, compressive strength is much greater than the current concrete material, together with the steel and other rough surface, can be quickly cured, is to correct the concrete base damage of the coating machine new scientific research results.